If you’re looking for trenchless pipe bursting in Redlands, CA, then you’ve come to the right place. Here we’re going to talk about the process, its benefits, and why you need it. If you live in the Redlands area, there’s a good chance you’ll have to have a professional plumbing team do work on your home or property. This is due to the natural soil and long history of the homes in the area.
Table of Contents
Typically, when you want to replace a pipe, you have to dig a trench the length of the section of pipe you want to replace, place new piping in the bottom of the channel, and then cover it all back up again. The problem with this method is that it is expensive, time-consuming, and disruptive. There’s got to be a better way.
Fortunately, there is asolution: it’s called trenchless pipe bursting. This method relies on creating an opening for one end of the pipe and then an exit for the other. Then, from the launching pit, you feed the tube through the ground until it pops out the other end. The idea of the process is to make it as easy as possible to replace a damaged or burst pipes without having to dig up half of your property.
As you might imagine, trenchless pipe bursting has a lot of benefits.
Rooting a pipe through a small gap in the ground is much less expensive than digging an entire trench. It also makes that the job gets done in less time, solving the issue more quickly.
Many plumbing services offer a lifetime warranty on trenchless pipe bursting, giving you peace of mind about the risk of a pipe burst in the future.
Root infestation can damage subterranean pipes. Today’s trenchless tubes use specialized materials and membranes that resist cracking.
It’s not all good news, though: there are also some downsides to trenchless pipe bursting.
While you don’t need a trench to lay the piping, you still need two holes – one at the entry, and one at the exit of the pipe.
It’s not always possible to make holes away from your landscaping. Sometimes you might need to dig up your driveway – not something that you want.
On the face of it, trenchless pipe bursting seems like a great way to get around many of the problems involved with digging trenches. You avoid having to excavate large volumes of earth and finding somewhere to pile them up, and you minimize disruption on your property.
Unfortunately, trenchless pipe bursting can run into difficulties, forcing you to switch to alternative methods. One problem is that you don’t always know if there is material blocking the passage of the pipe as you pass it from the launching hole to the receiving hole. Something, (like a concrete block), could be in the way, making passage impossible. You just don’t know ahead of time whether you’ll face an issue like this.
The effect of this is to increase the cost of the job. Plumbers then have to excavate more of the site, look for the blockage, and then find a way to remedy the problem. It’s an involved task that other landscaping features on your property can hamper.
Thus, when trenchless pipe bursting works, things run smoothly, but if you hit a snag, you could find that it becomes far less convenient than you imagined.
The cost of a trenchless pipe bursting project depends on the type of work that needs doing.
As a general rule of thumb, the price for replacing a foot of piping in Redlands, CA, is around $60 to $100 per foot. So, let’s say that you have fifty feet of tubing you need to replace. The cost of this would be somewhere between $3,000 and $5,000.
Whether you’re on the low or high end of that estimate depends on a range of factors. If your pipes are shallow, you’ll pay less; if they’re deep, you’ll pay more. If pipes are hard to access, or your property is a long way from the main road, you’ll also pay more.
If you’ve experienced subsidence, you often need to replace more than just one section of piping. As you might expect, costs rise when plumbers need to dig more than two holes.
If you’d like to find out more about trenchless pipe bursting in Redlands, CA, get in touch with us today.